鋼筋加工及安裝施工作業工藝標準.doc
進入下載頁
鋼筋加工及安裝作業工藝與作業標準一、材料所有鋼筋的種類、鋼號和直徑應符合365JT設計圖紙的規定，II、III、IV級鋼筋的力學性能應符合《鋼筋混凝土的熱軋帶肋鋼筋》（GB1499—91）的規定，I級鋼筋的力學性能應符合《鋼筋混凝土用熱軋光圓鋼筋》（GB13013—91）的規定。1. 每批鋼筋必須具有生產廠家的質保單，并由試驗室抽樣試驗合格后方可入使用。2. 同一批鋼筋應由相同橫截面和同一爐號的鋼筋組成。每批鋼筋（最多為60t）中取三根，各截取3節試件，一節作拉力試驗（屈服點、抗拉強度和伸長度），一節作冷彎試驗，一節可焊性試驗。所有試驗必......
Steel processing and installation standards processes and operations of a materials of all types of steel, steel and the diameter should be consistent with the provisions of 365JT design drawings, II, III, IV level should be consistent with the mechanical properties of steel "reinforced concrete hot rolled ribbed bar "(GB1499-91) requirements, I grade the mechanical properties of steel should conform to" the reinforcement of concrete hot-rolled round bar "(GB13013-91) requirements. 1. Each batch of steel manufacturers warranty must have a single, random testing by the laboratory until they have passed into use. 2. With a number of steel cross-section and the same should be the same heat number of steel composition. Each batch of steel (up to 60t) were obtained from 3, the interception of three specimens, one for tensile testing (yield point, tensile strength and elongation), one for cold test, a solderability test. All tests will be ......